Home
Replacement
System Cabinet Replacement
ICE
Replacing the Integrated Control Engine (ICE)
Removal and installation instructions for replacing the Integrated Control Engine (ICE) in the Integrated System Cabinet (ISC).
Installing the Integrated Control Engine (ICE)
Install the Integrated Control Engine (ICE) in the System Cabinet.

Replacement
- Operator WorkSpace Replacement
- System Cabinet Replacement
  - ICE
    - Replacing the Integrated Control Engine (ICE)
      Removal and installation instructions for replacing the Integrated Control Engine (ICE) in the Integrated System Cabinet (ISC).
      - Electrical Safety
        You must follow all recommended safety procedures when servicing and working near energy sources.
      - Shutting down the host computer
        Shutting down the host computer shuts down the system safely and turns off the power to the host computer.
      - Removing the Integrated Control Engine (ICE)
        Removing the Integrated Control Engine (ICE) from the System Cabinet.
      - Installing the Integrated Control Engine (ICE)
        Install the Integrated Control Engine (ICE) in the System Cabinet.
      - Starting up the host computer
        How to start the host computer.
      - Doing a check scan
        A check scan is done at the conclusion of many procedures. This functional check assures the unit is in good clinical working order.
    - Replacing the Integrated Control Engine (ICE) fan assembly
      Removal and installation instructions for replacing the Integrated Control Engine (ICE) fan assembly in the Integrated System Cabinet (ISC).
    - DCPS for ICE Replacement
    - Clock Splitter Replacement
  - PS for each module
  - XFA and XFD-PS Replacement
  - PDU
  - Leak Sensor
  - Cabinet Rear Panel
  - Water Manifold
  - HUB Replacement in System Cabinet
  - CSA
  - GP4
  - Driver Module Lite
  - Cabinet Monitor
  - Exciter
  - PHPS Lite 2
  - Top FAN Assy
  - ICN (Dell R620/R630)
  - ICN (Dell R640)
- Magnet Enclosure and Outer Electronics
- Rear Pedestal Replacement
- LPCA Replacement
- Coil Replacements
- Lite Patient Transport Replacement
- Low Height Fixed Table
- Coil Blower and Chiller Assemblies

SIGNA MR355 / SIGNA MR360
Service Manual
5856356-3EN Revision 5.0
Basic Service Documentation. Copyright General Electric Company.
Object ID: 00000018WIA30518530GYZ
Topic ID: id_2011280 Version: 4.0
Date: Feb 24, 2021 1:55:47 AM

Installing the Integrated Control Engine (ICE)

Prerequisites


Personnel requirements
Required persons	Preliminary requirements	Procedure	Finalization
1	-	30 minutes	-


Replacement parts
Item	Quantity	Part number	Manufacturer
	1		-

Procedure

Home
Replacement
System Cabinet Replacement
ICE
Replacing the Integrated Control Engine (ICE)
Removal and installation instructions for replacing the Integrated Control Engine (ICE) in the Integrated System Cabinet (ISC).
Installing the Integrated Control Engine (ICE)
Install the Integrated Control Engine (ICE) in the System Cabinet.