Home
Replacement
Operator WorkSpace Replacement
Replacing the DVD drive on the host computer
Removal and installation instructions for replacing the DVD drive on the host computer.
Removing LOTO - Global Operator Cabinet (GOC) and operator workspace
Remove LOTO from the GOC and operator workspace before restoring power to these items.

Replacement
- Operator WorkSpace Replacement
  - Dell T5810 Computer Replacement
  - Dell T5810 Lower Level FRU Replacement
  - HUB Replacement
  - PCI AA Replacement
  - GOC Dust Filter Clean/Replacement Procedure
  - Temperature & Humidity Sensor Replacement
  - GOC PDU Replacement
  - Replacing/Installing the SCIM, Keyboard and Mouse
  - Electrical Safety
    You must follow all recommended safety procedures when servicing and working near energy sources.
  - Shutting down the host computer
    Shutting down the host computer shuts down the system safely and turns off the power to the host computer.
  - Starting up the host computer
    How to start the host computer.
  - Doing a check scan
    A check scan is done at the conclusion of many procedures. This functional check assures the unit is in good clinical working order.
  - LCD Monitor Replace with HP HC240
  - Replacing the host computer - Dell T5820
    Removal and installation instructions to replace the host computer when upgrading the system.
  - Replacing the GOC hard drive
    Removal and installation instructions for replacing the solid state drive (SSD) on the host computer.
  - Replacing the DVD drive on the host computer
    Removal and installation instructions for replacing the DVD drive on the host computer.
    - Electrical Safety - Global Operator Cabinet (GOC)
      You must follow all recommended safety procedures when servicing and working near energy sources.
    - Shutting down the host computer
      Shutting down the host computer shuts down the system safely and turns off the power to the host computer.
    - Lockout / Tagout for the GOC
    - Removing the host computer
      Remove the host computer from the GOC when upgrading the system.
    - Removing the DVD drive from the host computer
      Remove the DVD drive from the host computer.
    - Installing the DVD drive in the host computer
      Install the DVD drive in the host computer.
    - Installing the host computer
      Install the host computer in the GOC after it has been serviced or replaced.
    - Removing LOTO - Global Operator Cabinet (GOC) and operator workspace
      Remove LOTO from the GOC and operator workspace before restoring power to these items.
    - Starting up the host computer
      How to start the host computer.
    - Finalizing DVD drive replacement on the host computer
      Follow this procedure to finalize a DVD drive replacement.
  - Replacing the CMOS battery - Dell T5820
    Removal and installation instructions for replacing the CMOS battery in the host computer.
  - Clean Dust Filter / Dust Filter Replacement
  - Replacing the Global Operator Cabinet Audio Assembly (GOCAA)
    Removal and installation instructions for replacing the Global Operator Cabinet Audio Assembly (GOCAA).
  - Replacing the Global Operator Cabinet (GOC) Power Distribution Unit (PDU)
    Removal and installation instructions for replacing the Power Distribution Unit (PDU) in the Global Operator Cabinet (GOC).
  - Replacing the CMOS battery - Dell T5820
    Removal and installation instructions for replacing the CMOS battery in the host computer.
- System Cabinet Replacement
- Magnet Enclosure and Outer Electronics
- Rear Pedestal Replacement
- LPCA Replacement
- Coil Replacements
- Lite Patient Transport Replacement
- Low Height Fixed Table
- Coil Blower and Chiller Assemblies

SIGNA MR355 / SIGNA MR360
Service Manual
5856356-3EN Revision 5.0
Basic Service Documentation. Copyright General Electric Company.
Object ID: 00000018WHA30DE07GYZ
Topic ID: id_2001925 Version: 6.0
Date: Feb 21, 2021 9:02:53 PM

Removing LOTO - Global Operator Cabinet (GOC) and operator workspace

Procedure

Alert necessary personnel that power is being restored.
Remove the lock and tag.

Home
Replacement
Operator WorkSpace Replacement
Replacing the DVD drive on the host computer
Removal and installation instructions for replacing the DVD drive on the host computer.
Removing LOTO - Global Operator Cabinet (GOC) and operator workspace
Remove LOTO from the GOC and operator workspace before restoring power to these items.