Topic ID: id_12373281
Version: 2.0
Date: Oct 10, 2019 11:40:29 AM

Replacing the hydraulic cylinder

Removes the hydraulic cylinder from a dockable patient table and installs a replacement hydraulic cylinder.

Prerequisites

Personnel requirements
Required persons	Preliminary requirements	Procedure	Finalization
1	-	90 minutes	-

Tools and test equipment
Item	Quantity	Part number	Manufacturer
Flat-Blade Screwdriver, Small	1	-	-
Flat-Blade Screwdriver, Medium	1	-	-
Needle-Nose Pliers	1	-	-
3/4 inch Open-End Wrench	2	-	-

Consumables
Item	Quantity	Part number	Manufacturer
Self-locking Cable Tie	As required	-	-
Absorbent Towels	As required	-	-

Replacement parts
Item	Quantity	Part number	Manufacturer
Hydraulic Cylinder Assembly	1	5142785-205	-

Safety
Before working in any GE Healthcare MR suite or performing any GE Healthcare service procedure, you must: Have read and understood all hazard conditions and safety requirements in the latest revision of the GE Healthcare MR Service Safety Manual (5452735). Have successfully completed all relevant GE Healthcare Environmental Health and Safety (EHS) courses (or for non-GE employees, equivalent workplace training courses). Comply with all site-specific training and workplace safety requirements. If you have any safety concerns at any time, do not begin work or immediately stop work and move to a safe location. Immediately contact your supervisor or site safety officer for instructions on how to proceed.

Safety

Before working in any GE Healthcare MR suite or performing any GE Healthcare service procedure, you must:

Have read and understood all hazard conditions and safety requirements in the latest revision of the GE Healthcare MR Service Safety Manual (5452735).
Have successfully completed all relevant GE Healthcare Environmental Health and Safety (EHS) courses (or for non-GE employees, equivalent workplace training courses).
Comply with all site-specific training and workplace safety requirements.

If you have any safety concerns at any time, do not begin work or immediately stop work and move to a safe location. Immediately contact your supervisor or site safety officer for instructions on how to proceed.