• Topic ID: id_12373721
  • Version: 2.0
  • Date: Jan 20, 2020 12:54:53 AM

Replacing the hydraulic filter

Removal and installation instructions for replacing the hydraulic filter in the dockable patient table.

Prerequisites

Personnel requirements
Required persons Preliminary requirements Procedure Finalization
1 - 40 minutes -
Tools and test equipment
Item Quantity Part number Manufacturer
3/4 inch Open-End Wrench 2 - -
Ear Syringe 1 - -
Standard Tool Kit with Phillips Screwdrivers 1 - -
Consumables
Item Quantity Part number Manufacturer
Hydraulic Oil 1 See FRU Manual -
Towels As needed - -
Loctite® 569 1 bottle (50 ml) 46-230614P1 -
Replacement parts
Item Quantity Part number Manufacturer
Hydraulic Oil Filter And Gasket 1 See FRU Manual -
Safety

Before working in any GE Healthcare MR suite or performing any GE Healthcare service procedure, you must:

  • Have read and understood all hazard conditions and safety requirements in the latest revision of the GE Healthcare MR Service Safety Manual (5452735).
  • Have successfully completed all relevant GE Healthcare Environmental Health and Safety (EHS) courses (or for non-GE employees, equivalent workplace training courses).
  • Comply with all site-specific training and workplace safety requirements.

If you have any safety concerns at any time, do not begin work or immediately stop work and move to a safe location. Immediately contact your supervisor or site safety officer for instructions on how to proceed.

Overview

Do the following procedure as directed to maintain smooth, responsive operation of the patient table hydraulics.