Removes the front service access panel from the magnet to allow access to components mounted on the left-hand side of the magnet.
Prerequisites
| Personnel requirements |
|---|
| Required persons | Preliminary requirements | Procedure | Finalization |
|---|
| 1 | - | 5 minutes | - |
| Tools and test equipment |
|---|
| Item | Quantity | Part number | Manufacturer |
|---|
| Nonmagnetic Titanium Service Tool Kit, Small Set | 1 | 5113258 | - |
| Required conditions |
|---|
| Service access trim is removed. |
Procedure
- Remove three screws securing the front service access panel to the rear service access panel.
Figure 1. Front service access panel screws
- Slide the panel forward until it stops.
- Lift the panel upward and remove it from the magnet enclosure.
