• SIGNA™ Hero 3.0T Service Methods
  • 5852800-8EN Revision 1.0
  • Object ID: 00000018WIA30526C40GYZ
  • Topic ID: id_2019391 Version: 2.4
  • Date: Apr 23, 2020 8:51:53 PM

Removing the dockable table handle

Removes the handle from the dockable table.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-10 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-

Procedure

  1. Remove the two screws securing the handle arms to the handle tube.
    Figure 1. Handle parts
    1Right-hand handle arm
    2Handle tube
    3Left-hand handle arm
    4Handle screw
  2. Remove the left-hand handle arm from the handle tube.
  3. Remove the handle tube from the right-hand handle arm.
  4. Remove the screw securing the handle button to the handle arm.
    Figure 2. Handle button screw
  5. Remove the handle button from the arm.
    Figure 3. Handle button
  6. Remove the six shoulder screws securing the handle arm to the handle hinge.
    Important: The shoulder screws are easy to strip. Use caution when removing these screws.
    Figure 4. Handle right-hand arm
    1Shoulder screw
    2Right-hand handle arm
  7. Remove the arm from the table.