Installing the Digitized Per Pin (DPP) Receiver Distributor (Rx Dist)
Install a Digitized Per Pin (DPP) Receiver Distributor (Rx Dist) in the magnet outer electronics.
Prerequisites
Personnel requirements
Required persons
Preliminary requirements
Procedure
Finalization
1
-
15 minutes
-
Tools and test equipment
Item
Quantity
Part number
Manufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set
1 Kit
5113258
-
Nonmagnetic Titanium Service Tool Kit, Large Set
5112581
-
Replacement parts
Item
Quantity
Part number
Manufacturer
1
Refer to FRU Manual
-
Safety
CAUTION
Strong magnetic field
The Digitized Per Pin (DPP) Receiver Distributor (Rx Dist) has no ferrous material and will not be attracted to the magnet, but the eddy currents can cause resistance when you pull the DPP Rx Dist away from the magnet.
When removing and replacing the DPP Rx Dist, keep the receiver as far away from the magnet as possible while moving it.
About this task
Perform the removal steps in reverse order to restore the system.
Notice
Component damage risk
Applying too much force when pins are not properly aligned to the corresponding socket will bend the pins and can break the connector or cable.
J5, J6, J7, J8, and J9 of the DPP Rx Dist are Twin BNC plugs for a local oscillator cable. Align pins and keys properly before connecting them.
