Object ID: 00000018WIA30503640GYZ
Topic ID: id_2014242 Version: 5.0
Date: Feb 23, 2021 3:30:53 AM

Installing the Digitized Per Pin Remote Receiver (DPP RRx)

Prerequisites


Personnel requirements
Required persons	Preliminary requirements	Procedure	Finalization
1	-	15 minutes	-


Tools and test equipment
Item	Quantity	Part number	Manufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set	1 Kit	5113258	-
Nonmagnetic Titanium Service Tool Kit, Large Set	1 Kit	5112581	-


Replacement parts
Item	Quantity	Part number	Manufacturer
DPP RRx	1	Refer to FRU Manual	-

Safety

CAUTION

Strong magnetic field

The Digitized Per Pin Remote Receiver (DPP RRx) has no ferrous material and will not be attracted to the magnet, but the eddy currents can cause resistance when you pull the DPP RRx away from the magnet.

When removing and replacing the DPP RRx, keep the receiver as far away from the magnet as possible while moving it.

About this task

Perform the removal steps in reverse order to restore the system.

Notice

Component damage risk

Applying too much force when pins are not properly aligned to the corresponding socket will bend the pins and can break the connector or cable.

J10 of each DPP is a Twin BNC plug for a local oscillator cable. Align pins and keys properly before connecting them.

Note: J6 and J9 are connectors for the SFP Transceiver. To insert the SFP cable connector, push the latch block from both sides until it clicks into place.