• Topic ID: task_cjh_bh1_qfb
  • Version: 4.2
  • Date: Feb 28, 2020 3:17:32 PM

Removing LOTO - RF Subsystem and/or PEN Cabinet

Procedure

  1. Alert necessary personnel that power is being restored.
  2. Remove the personal LOTO device(s) from the front panel of the PDU.
  3. At the front panel of the PDU toggle the RF Subsystem/PEN Cabinet circuit breaker switches to the ON position.
    note: You may need to perform an EMO Reset if the RF Amp LEDs do not come on. To perform an EMO Reset, press the EMO RESET switch on the PDU. (See #task_cjh_bh1_qfb/fig_xmh_bh1_qfb.)