• Optima MR450w BASE 1.5T System Service Methods
  • 5690012-2EN Revision 3
  • Object ID: 00000018WHA300E62GYZ
  • Topic ID: id_2001470 Version: 3.0
  • Date: Jul 8, 2019 1:44:56 PM

Shutting down the ICN

This procedure documents the proper methods of shutdown for the Dell R-620/630 ICN.

Prerequisites

Personnel requirements
Required PersonsPreliminary requirementsProcedureFinalization
1-25 minutes-
Safety

Before working in any GE Healthcare MR suite or performing any GE Healthcare service procedure, you must:

  • Have read and understood all hazard conditions and safety requirements in the latest revision of the GE Healthcare MR Service Safety Manual (5452735).
  • Have successfully completed all relevant GE Healthcare Environmental Health and Safety (EHS) courses (or for non-GE employees, equivalent workplace training courses).
  • Comply with all site-specific training and workplace safety requirements.

If you have any safety concerns at any time, do not begin work or immediately stop work and move to a safe location. Immediately contact your supervisor or site safety officer for instructions on how to proceed.

About this task

The ICN is powered down when the host software is shut down. To shut the ICN down individually, use the VRE Power Control utility. If the preferred shutdown method does not work, a last resort is to use the ICN power button.