Installs the table rear bridge cover onto the magnet enclosure.
Prerequisites
| Personnel requirements |
|---|
| Required persons | Preliminary requirements | Procedure | Finalization |
|---|
| 1 | - | 5 minutes | - |
| Tools and test equipment |
|---|
| Item | Quantity | Part number | Manufacturer |
|---|
| Nonmagnetic Titanium Service Tool Kit, Small Set | 1 | 5113258 | - |
| Required conditions |
|---|
| Rear bridge inner cover is installed. |
Procedure
- Install the rear bridge cover onto the rear bridge inner cover.
Figure 1. Rear bridge cover
- Install three M10 x 20 Button Head Screws securing rear bridge cover to rear bridge inner cover.
Figure 2. Rear bridge cover screws
