Removes the speaker from the magnet rear endbell.
Prerequisites
| Personnel requirements |
|---|
| Required persons | Preliminary requirements | Procedure | Finalization |
|---|
| 1 | - | 5 minutes | |
| Tools and test equipment |
|---|
| Item | Quantity | Part number | Manufacturer |
|---|
| Nonmagnetic Titanium Service Tool Kit, Small Set | 1 | 5113258 | - |
| Required conditions |
|---|
| The rear cable cover is removed. |
Procedure
- Disconnect the speaker cable behind the enclosure.
- Remove the four screws securing the speaker and speaker cover to the rear endbell.
Figure 1. Rear endbell speaker
| 1 | Speaker |
| 2 | Speaker cover |
| 3 | Screw |
- Remove the speaker cover from the rear endbell.
- Remove the speaker from the rear endbell.
- Remove two speaker wires from two push-on connections.
Figure 2. Speaker wire
