Removes the rear cable cover from the magnet enclosure.
Prerequisites
| Personnel requirements |
|---|
| Required persons | Preliminary requirements | Procedure | Finalization |
|---|
| 1 | - | 5 minutes | - |
| Tools and test equipment |
|---|
| Item | Quantity | Part number | Manufacturer |
|---|
| Nonmagnetic Titanium Service Tool Kit, Small Set | 1 | 5113258 | - |
| Required conditions |
|---|
| Rear trim ring is removed. |
Procedure
- Remove four screws securing the rear cable cover to the magnet enclosure.
Figure 1. Rear cable cover screws
- Lift the rear cable cover vertically to disengage the cable cover clips from the bracket.
- Remove the rear cable cover from the magnet enclosure.
Figure 2. Rear cable cover
