Determining GE Coil Type

Prerequisites

Table 1. Personnel requirements
Required persons	Preliminary requirements	Procedure	Finalization
1	Not Applicable	5 minutes	Not Applicable

Table 2. Consumables
Item	Quantity	Effectivity	Part number	Manufacturer
	-	-	-	-

This procedure is intended to determine the GE coil name used during a scan if the Customer has re-named a coil.

Make sure Exam is loaded on the hard drive. If needed, dump the Exam back on to the system hard drive.
Open a Cshell
In the Cshell type: readHeadEnter. A tool will appear.
Enter the proper Exam number and series number.
Select option gEnter
Select option yEnter
Go to the second page and scroll until the coil name is displayed. See Figure 1.

Figure 1. Coil Details

No finalization steps.