Home
Replacements
Patient Table
Replacing the hydraulic rotary pump
Replaces the hydraulic rotary pump of the dockable patient table.
Removing the hydraulic rotary pump drip pan
Removes the rotary pump oil drip pan from the dockable patient table.

Replacements
- System
- Gradient
- RF
- Coils
- Magnet Enclosure
- Patient Table
  - Arm Board Hinge and Shoulder Screw Replacement
  - Connector Cover and Handle Hinge Replacements
  - Cotton Rod Replacement
  - Cradle Assembly removal and replacement
    This procedure describes how to remove the cradle from the patient table and how to replace the cradle. The procedure also describes how to remove various subcomponents located in the cradle and how to replace them.
  - Replacing the cradle guide rail
    Replace the cradle guide rail, which is locked in the home position with a latch on the patient table bridge. The latch engages a notch on the cradle guide rail at the rear of the table.
  - Replacing the cradle latch–curved table
    Replace the cradle latch housing for a 32-channel system or a 16-channel system.
  - Cradle Latch Block Replacement
  - GEM replacements
  - Replacing the hydraulic filter
    Removal and installation instructions for replacing the hydraulic filter in the dockable patient table.
  - Hydraulic Fluid Draining and Rotary Pump Replacement Videos
    Visit the MR Service Documentation Website to view video clips showing the process to replace the rotary pump and drain the table hydraulic fluid.
  - Patient Table braking system replacements
    This procedure explains how to replace various components in the Table braking system and how to do various braking system checks at the completion of the replacements.
  - Patient Table Cable Take-up and GEM MUX Box Replacement
  - Patient Table Caster, Wheel and Pad Replacement
  - Patient Table Components
  - Replacing the hydraulic cylinder
    Removes the hydraulic cylinder from a dockable patient table and installs a replacement hydraulic cylinder.
  - Replacing the hydraulic rotary pump
    Replaces the hydraulic rotary pump of the dockable patient table.
    - Removing the hydraulic rotary pump drip pan
      Removes the rotary pump oil drip pan from the dockable patient table.
    - Removing the hydraulic rotary pump
      Removes the hydraulic rotary pump from the dockable table.
    - Removing the female coupler
      Removes the female coupler from the patient table hydraulic rotary pump.
    - Installing the female coupler
      Installs the female coupler on the patient table hydraulic rotary pump.
    - Installing the hydraulic rotary pump
      Installs the hydraulic rotary pump in the dockable patient table.
    - Installing the hydraulic rotary pump drip pan
      Installs the rotary pump oil drip pan on the dockable patient table.
  - Replacing the table rotary pump couplers
    Replaces the table female or dock male rotary pump coupler.
  - Replacing the reciprocating pump assembly
    Removes the reciprocating pump assembly from the dockable patient table and installs a replacement reciprocating pump assembly.
  - Patient Table Up Limit Replacements
  - Patient table upper bellows and lower base side cover removal
  - Replacing the secondary latch actuating cable
  - Replacing table electrical docking mechanism components
    Removes table components related to electrical docking and installs replacement components.
  - Replacing table undock mechanism components
    Removes the undock link and lever from the table base and installs replacement components.
  - Touch-n-Go (TnG) strip and side bumper replacement
- Spectroscopy

Discovery MR750w and SIGNA™ Architect T 3.0T System Service Methods
5690002-2EN Revision 4
Object ID: 00000018WIA3010B350GYZ
Topic ID: id_2020833 Version: 2.1
Date: Apr 23, 2020 8:52:42 PM

Removing the hydraulic rotary pump drip pan

Procedure

Lift one side of the drip pan and gently push it inwards to flex the bottom of the pan.
While pushing the side of the pan inward, push the pan down between the rails, and slide the pan out from under the table.

Figure 1. Hydraulic rotary pump oil drip pan