• Object ID: 00000018WIA30522C40GYZ
  • Topic ID: id_2018262 Version: 2.4
  • Date: Apr 23, 2020 8:51:39 PM

Installing the left-hand base side cover

Installs the left-hand cover onto the dockable table base.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-5 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-
Required conditions
The rear base cover is installed.

Procedure

  1. Install the left-hand base side cover to the table, brake pedal end first.
    Figure 1. Left-hand base side cover
  2. Install the two M5 x 12 Button Head Screws securing the base side cover to the table base.
    Figure 2. Base side cover top screws
  3. Install the four M10 x 20 Button Head Screws securing the base side cover to the table base.
    Figure 3. Base side cover bottom screws
  4. Tighten the 10-32 x ½ Phillips Head Screw securing the front of the base side cover.
    Note: Do not over-tighten the screw. The screw only needs to be snug to the cover.
    Figure 4. Base side cover front screw