- Optima MR450w BASE 1.5T System Service Methods
- 5690012-2EN Revision 3
- 00000018WIA30203640GYZ
- id_20142392.18
- Jun 10, 2021 10:47:28 AM
Removing the Digitized Per Pin (DPP) Receiver Distributor (Rx Dist)
Remove the Digitized Per Pin (DPP) Receiver Distributor (Rx Dist) from the magnet outer electronics.
Prerequisites
| Personnel requirements | |||
|---|---|---|---|
| Required persons | Preliminary requirements | Procedure | Finalization |
| 1 | - | 15 minutes | - |
| Tools and test equipment | |||
|---|---|---|---|
| Item | Quantity | Part number | Manufacturer |
| Nonmagnetic Titanium Service Tool Kit, Small Set | 1 Kit | 5113258 | - |
| Nonmagnetic Titanium Service Tool Kit, Large Set | 5112581 | - | |
Procedure
| CAUTION | |
|---|---|
 | Strong magnetic field The Digitized Per Pin (DPP) Receiver Distributor (Rx Dist) has no ferrous material and will not be attracted to the magnet, but the eddy currents can cause resistance when you pull the DPP Rx Dist away from the magnet. When removing and replacing the DPP Rx Dist, keep the receiver as far away from the magnet as possible while moving it. |
Note: The screw holes for attaching the DPP Rx Dist are a keyhole shape or slotted so it is not necessary to remove the four screws. Just loosen them.