• Topic ID: id_2001847
  • Version: 7.0
  • Date: Aug 23, 2019 3:56:11 AM

Completing the EPT

When the tests are complete, one of the following messages appears:
  • Your tests completed successfully.
  • A serious system problem has been detected. This problem IS expected to impact image quality.
  • EPT was unable to determine PASS/FAIL status of the tests.

Procedure

  1. If the tests completed successfully, proceed to Finalizing the EPT.
  2. If the tests fail, open the Report Manager to view the test results and identify the failing tests.
  3. Select Quit EPT and confirm.
    note:

    If the EPT process is not shut down in an orderly manner, the service protocol directions may need to be reset. Open a C-shell (click C Shell in the Service Desktop Manager) and enter the following:

    /usr/g/bin/ept Enter

    resetept Enter