Home
Replacements
Patient Table
Replacing the hydraulic rotary pump
Replaces the hydraulic rotary pump of the dockable patient table.
Removing the hydraulic rotary pump drip pan
Removes the rotary pump oil drip pan from the dockable patient table.

Replacements
- Replacement Procedures
- System
- Gradient
- RF
- Coils
- Magnet Enclosure
- Patient Table
  - Cradle Latch Assembly Replacement
  - Arm Board Hinge and Shoulder Screw Replacement
  - Connector Cover and Handle Hinge Replacements
  - Cotton Rod Replacement
  - Cradle Assembly Removal and Replacement
  - Cradle Guide Rail Replacement
  - Cradle Latch Replacement–Curved Table
  - Cradle Latch Block Replacement
  - Replacing the hydraulic filter
    Removal and installation instructions for replacing the hydraulic filter in the dockable patient table.
  - Hydraulic Fluid Draining and Rotary Pump Replacement Videos
  - Patient Table Braking System Replacements
  - Patient Table Cable Take-up and GEM MUX Box Replacement
  - Patient Table Caster, Wheel and Pad Replacement
  - Patient Table Components
  - Replacing the hydraulic cylinder
    Removes the hydraulic cylinder from a dockable patient table and installs a replacement hydraulic cylinder.
  - Replacing the hydraulic rotary pump
    Replaces the hydraulic rotary pump of the dockable patient table.
    - Removing the hydraulic rotary pump drip pan
      Removes the rotary pump oil drip pan from the dockable patient table.
    - Removing the hydraulic rotary pump
      Removes the hydraulic rotary pump from the dockable table.
    - Removing the female coupler
      Removes the female coupler from the patient table hydraulic rotary pump.
    - Installing the female coupler
      Installs the female coupler on the patient table hydraulic rotary pump.
    - Installing the hydraulic rotary pump
      Installs the hydraulic rotary pump in the dockable patient table.
    - Installing the hydraulic rotary pump drip pan
      Installs the rotary pump oil drip pan on the dockable patient table.
  - Replacing the table rotary pump couplers
    Replaces the table female or dock male rotary pump coupler.
  - Replacing the reciprocating pump assembly
    Removes the reciprocating pump assembly from the dockable patient table and installs a replacement reciprocating pump assembly.
  - Patient Table Up Limit Replacements
  - Patient table upper bellows and lower base side cover removal
  - Replacing the secondary latch actuating cable
  - Table/dock connector and Touch-n-Go (TnG) cable replacement
  - Replacing table electrical docking mechanism components
    Removes table components related to electrical docking and installs replacement components.
  - Replacing table undock mechanism components
    Removes the undock link and lever from the table base and installs replacement components.
  - Touch-n-Go (TnG) strip and side bumper replacement

Optima MR450w BASE 1.5T System Service Methods
5690012-2EN Revision 3
Object ID: 00000018WIA3010B350GYZ
Topic ID: id_2020833 Version: 2.1
Date: Apr 23, 2020 8:52:42 PM

Removing the hydraulic rotary pump drip pan

Procedure

Lift one side of the drip pan and gently push it inwards to flex the bottom of the pan.
While pushing the side of the pan inward, push the pan down between the rails, and slide the pan out from under the table.

Figure 1. Hydraulic rotary pump oil drip pan