Home
Replacements
System
Global Operator Console (GOC)
Replacing the GOC hard drive - Dell T5820
Removal and installation instructions for replacing the solid state drive (SSD) in the host computer.
Installing the GOC hard drive - Dell T5820
Install the solid state drive (SSD) in the host computer.

Replacements
- Replacement Procedures
- System
  - Coolant draining
  - Hoist Service Kit and Lifting Accessories
  - Power, Gradient, and RF (PGR) Cabinet
  - Penetration (PEN) Cabinet
  - Heat Exchange Cabinet
  - Global Operator Console (GOC)
    - Checking the GOC battery replacement
      Check the battery replacement sticker on the GOC.
    - HP 8400 Ethernet Switch Replacement
    - HP 8400 Computer Replacement
    - Dell T5810 Computer Replacement
    - Dell T5810 Lower Level FRU Replacement
    - GOC Audio Assembly Replacement - New GOC
    - GOC Power Distribution Supply Replacement
    - Keyboard, Mouse, and SCIM Replacement or Installation
    - HP 8400 Lower Level FRU Replacement
    - HP Z400 Computer Replacement
    - HP Z400 Ethernet Switch Replacement
    - HP Z400 Lower Level FRU Replacement
    - HP Z420 Computer Replacement
    - HP Z420 Lower Level FRU Replacement
    - Replacing the host computer - Dell T5820
      Removal and installation instructions to replace the host computer when upgrading the system.
    - Replacing the CMOS battery - Dell T5820
      Removal and installation instructions for replacing the CMOS battery in the host computer.
    - Replacing the DVD drive - Dell T5820
      Removal and installation instructions for replacing the DVD drive in the host computer.
    - Replacing the GOC hard drive - Dell T5820
      Removal and installation instructions for replacing the solid state drive (SSD) in the host computer.
      - Electrical Safety
        You must follow all recommended safety procedures when servicing and working near energy sources.
      - Preparing the workstation for a computer replacement
        Prepare the workstation so all data is saved prior to shutting down and replacing the host computer in the GOC.
      - Shutting down the host computer
        Shutting down the host computer shuts down the system safely and turns off the power to the host computer.
      - Applying LOTO - Global Operator Cabinet (GOC) and operator workspace
        Apply LOTO before servicing the GOC or items in the operator workspace. Applying LOTO ensures a safe environment when working on these items.
      - Removing the GOC hard drive - Dell T5820
        Remove the solid state drive (SSD) from the host computer.
      - Installing the GOC hard drive - Dell T5820
        Install the solid state drive (SSD) in the host computer.
      - Removing LOTO - Global Operator Cabinet (GOC) and operator workspace
        Remove LOTO from the GOC and operator workspace before restoring power to these items.
      - Starting up the host computer
        How to start the host computer.
      - Finalizing computer or drive replacement
        Follow this procedure to finalize a computer or hard drive replacement.
    - Electrical Safety
      You must follow all recommended safety procedures when servicing and working near energy sources.
    - Shutting down the host computer
      Shutting down the host computer shuts down the system safely and turns off the power to the host computer.
    - Starting up the host computer
      How to start the host computer.
    - Doing a check scan
      A check scan is done at the conclusion of many procedures. This functional check assures the unit is in good clinical working order.
    - In-Room Display Fiber Optic Converter Box Replacement
    - LCD Monitor Installation
- Gradient
- RF
- Coils
- Magnet Enclosure
- Patient Table

Optima MR450w BASE 1.5T System Service Methods
5690012-2EN Revision 3
Object ID: 00000018WIA304D4840GYZ
Topic ID: id_2014918 Version: 4.0
Date: Dec 9, 2019 1:05:39 AM

Installing the GOC hard drive - Dell T5820

Prerequisites


Personnel requirements
Required persons	Preliminary requirements	Procedure	Finalization
1	-	15 minutes	-


Tools and test equipment
Item	Quantity	Part number	Manufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set (can be used on magnets with magnetic fields > 1.5T)	1	5113258	-
ESD Mat	1	-	-
ESD Strap	1	-	-


Replacement parts
Item	Quantity	Part number	Manufacturer
512GB SATA III SFF SSD 3D-TLS or V NAND Memory	2	8780011-102	-


Required conditions
Use an antistatic wrist strap and mat while performing this procedure to prevent electrostatic discharge (ESD). Access to both the front and rear of the operator console is required. Move the console away from walls and remove obstacles in the room.

About this task

The Dell T5820 has two SSDs, and they have the same installation procedure.

Procedure

Insert the HDD into the 3.5 inch bracket with the connector end of the hard drive towards the back of the HDD bracket.
Slide the HDD bracket back into the hard drive bay.
Install the HDD bracket.
1. Slide the bracket into the drive bay until it clicks into place.
  
  CAUTION: Make sure the latch is open before installing the bracket.
2. Lock the latch.
Install the HDD bezel.
1. Hold the bezel and make sure the hooks on the bezel snap into the notches on the system.
2. Press the blue lock button on the left edge of the ODD bay to secure the bezel to the system.
Install the side cover.
1. Hold and align the bottom of the side cover to the chassis.
2. Make sure the hook on the bottom of the side cover snaps into the notch on the system.
3. Press the system cover until it clicks into place.
  
  CAUTION: The system will not power on without the side cover. Also, the system will shut down if the side cover is removed while the system is on.
Connect the short ground lead that connects the left side panel to the GOC main chassis at the center of the lead.
Secure the left side panel to the GOC.
Get a GE equipment maintenance sticker, and write today's date on the sticker. Put the sticker on the GOC where it is easily visible.

Note: When replacing the hard drive or DVD drive, a maintenance sticker is not required.