Home
Software
Software Security
Setting custom security settings
These procedures outline BIOS setup and configuration, and user information for MR. This document was formally titled Setting custom security settings.
Setting custom security settings
These procedures apply to Dell T5810/T5820 or HP Z420.
Setting the admin password - HP Z420
This is the procedure to set the password for the first time. If the password has been set previously, go to the next section.

Software
- System Host Software
- InSite Remote Service Platform (RSvP)
  Configuration information for the InSite Remote Service Platform (RSvP).
- System Level Software Utilities
- Software Security
  - Data privacy
  - Logging in as root
    Use this procedure to log in as root.
  - MR Cyber Security Manual
    These procedures outline the configuration of a secure environment for your MR system.
  - Security levels
  - Service licensing
    Secure Service Access (SSA) is a secure service key platform for GE medical devices developed to improve the service license renewal and replacement processes.
  - Setting custom security settings
    These procedures outline BIOS setup and configuration, and user information for MR. This document was formally titled Setting custom security settings.
    - Setting custom security settings
      These procedures apply to Dell T5810/T5820 or HP Z420.
      - Setting the boot sequence - Dell T5810/T5820 (MR27 or earlier)
        Specifies the order of host computer boot devices.
      - Setting the boot sequence - Dell T5810 (MR28 or later)
        Specifies the order of host computer boot devices.
      - Setting the boot sequence - Dell T5820 (MR28 or later)
        Specifies the order of host computer boot devices.
      - Setting the BIOS password - Dell T5810/T5820
        Sets the password for the first time. Do not use this procedure if the password has been previously set.
      - Changing the BIOS password - admin password known - Dell T5810/T5820
        Change an existing admin password when the previous password is known.
      - Resetting the BIOS password - admin password unknown - Dell T5810/T5820
        Resets the passwords for the BIOS settings when the admin password is not known.
      - Setting the boot sequence - HP Z420 workstation
        Specifies the order of host computer boot devices.
      - Setting the admin password - HP Z420
        This is the procedure to set the password for the first time. If the password has been set previously, go to the next section.
      - Changing the BIOS password - admin password known - HP Z420
        Change the BIOS password if the admin password is known.
      - Changing the BIOS password - admin password unknown - HP Z420
        Change the BIOS password if the admin password is unknown.
    - Enabling or disabling emergency logon authority
      Emergency logon allows the user to access the MR applications without logging in using a password. This may not be desired depending on the security level required at your site.
    - Setting up enterprise authentication
      Enterprise Authorization with encrypted communication using TLS and certificates is available for software 29 and later. If the facility IT desires, TLS Certificates are required to establish this encryption.
    - Creating local users
      Configure the local users settings.
    - Data privacy
    - Logging on and off
      Use this procedure to log on and off the system.

SIGNA MR355 / SIGNA MR360
Service Manual
5856356-3EN Revision 5.0
Basic Service Documentation. Copyright General Electric Company.
Object ID: 00000018WIA301FC630GYZ
Topic ID: id_2011695 Version: 4.0
Date: Jul 10, 2019 4:11:53 PM

Setting the admin password - HP Z420

Procedure

Start the BIOS utility by turning on or restarting the computer and pressing the F10 key (or ESC, then F10 key) when Press F10 to enter setup is displayed in the lower left screen.
Click the Security tab.
Select Set up Password from the menu.

Figure 1. Setting a password
In the New Password field, enter the new password.
In the Confirm Password field, repeat the new password.
Click F10 to accept (save) the new password.

Home
Software
Software Security
Setting custom security settings
These procedures outline BIOS setup and configuration, and user information for MR. This document was formally titled Setting custom security settings.
Setting custom security settings
These procedures apply to Dell T5810/T5820 or HP Z420.
Setting the admin password - HP Z420
This is the procedure to set the password for the first time. If the password has been set previously, go to the next section.