Discovery MR450 1.5T Service MethodsManual Type Goes HereOptional Hardware or Software Version Goes Here
Discovery MR450 1.5T Service MethodsManual Type Goes HereOptional Hardware or Software Version Goes Here
  • Readme
  • Safety
  • Pre-Installation
  • Installation and Upgrade
  • Adjustments/Calibrations
  • Functional Checks
  • Software
  • Theory
  • System Diagrams
  • Planned Maintenance
  • Troubleshooting
  • Parts
  • Replacements
  • Applications
  • Coils
  • Options
  • Error Message Tool
  1. Home
  2. Adjustments/Calibrations
  3. Radio Frequency (RF)
  4. Probe
  5. Probe Data Sheets
  • Topic ID: id_12374318
  • Version: 1.2
  • Date: Jul 5, 2019 6:08:28 PM

Probe Data Sheets

Figure 1. Data Sheets

4901504.pdf

For details see Probe/SV Calibration and SNR Tests.

  • Adjustments/Calibrations
    • System
    • Gradient
    • Radio Frequency (RF)
      • Calibrating transmit/receive dynamic disable

        Calibrates the open circuit fault detection levels of the dynamic disable drivers in the driver module. Perform this procedure after system installation, driver module replacement, body coil replacement, body hybrid replacement, or replacement of cabling between any of the previously listed devices.

      • Probe
        • Probe Tuning and SNR Check Tool (DV24 and later)
        • Probe/SV Calibration and SNR Tests
        • Manual Entry Probe/SV SNR Protocols
        • Probe Data Sheets
    • Magnet Enclosure
    • Patient Table
    • Global Operator Console (GOC)
    • Spectroscopy

Basic Service Documentation. Copyright General Electric Company.

5690022-2EN | Revision 2 | en-us | Legal Notice | ge.com

©2020