• Discovery MR750w and SIGNA™ Architect T 3.0T System Service Methods
  • 5690002-2EN Revision 4
  • Object ID: 00000018WIA30D08110GYZ
  • Topic ID: id_2004084 Version: 4.14
  • Date: Feb 2, 2022 2:09:29 PM

Setting up HIS and RIS

Directions on configuring HIS/RIS, checking connectivity, and setting information retrieval preferences.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-15 to 60 minutes, depending on configuration-
Required conditions
Get HIS/RIS and filming network information from customer administrator.
Safety

Before working in any GE Healthcare MR suite or performing any GE Healthcare service procedure, you must:

  • Have read and understood all hazard conditions and safety requirements in the latest revision of the GE Healthcare MR Service Safety Manual (5452735).
  • Have successfully completed all relevant GE Healthcare Environmental Health and Safety (EHS) courses (or for non-GE employees, equivalent workplace training courses).
  • Comply with all site-specific training and workplace safety requirements.

If you have any safety concerns at any time, do not begin work or immediately stop work and move to a safe location. Immediately contact your supervisor or site safety officer for instructions on how to proceed.