Home
Troubleshooting
Diagnostics
System Function
Patient Handling
SRI Datapath
Doing the Scan Room Interface (SRI) board level diagnostic
The purpose of this diagnostic is to check that the Scan Room Interface (SRI) power-up and required connections are satisfied.

Troubleshooting
- Diagnostics
  - Doing overnight diagnostics
    Overnight Diagnostics is a series of pass/fail tests performed on a schedule determined by the customer.
  - System Function
    - Acquisition
    - Global Operator Console
    - Gradient
    - Patient Handling
      - SRI Functional Diagnostics
      - SRI Datapath
        Doing the Scan Room Interface (SRI) board level diagnostic
        The purpose of this diagnostic is to check that the Scan Room Interface (SRI) power-up and required connections are satisfied.
        Doing SRI SCP Loop Test
      - PHPS Function Diagnostics
      - Doing the Controller Area Network (CAN) link diagnostic
        The purpose of this diagnostic is to perform a read-write test on any available nodes on the CAN network.
    - Peripheral Communications
    - Recon
    - RF
  - Hardware Location
- Troubleshooting Steering Guide
- Image Quality Troubleshooting Tools

SIGNA MR355 / SIGNA MR360
Service Manual
5856356-3EN Revision 5.0
Basic Service Documentation. Copyright General Electric Company.
Object ID: 00000018WIA3097DF20GYZ
Topic ID: id_13106192 Version: 1.8
Date: Jan 8, 2021 11:46:00 PM

Doing the Scan Room Interface (SRI) board level diagnostic

Disclaimer

Depending on your service agreement, not all service tools, diagnostics, and utilities referenced in this document may be accessible. Contact your sales person for information on available service license packages.

Doing the Scan Room Interface (SRI) board level diagnostic

Disclaimer

Diagnostic Link

Purpose

Components Tested

Requirements

Block Diagrams

Test Sequence

Expected Results

Finalization