I/O Data

Diagnostic Link

Diagnostics >> System Function >> RF >> UPM Diagnostics

Diagnostics >> Hardware Location >> PGR Cabinet >> CAM >> UPM Diagnostics

Figure 1. I/O Status

Purpose

The UPM Diagnostic reads the power supply information from the UPM board.

Components Tested

• Chassis Power Supply

• Isolated 5 Volts

• FPGA Initialization

• Flash Power

• RF NB Board and Cable

• RF MNS Board and Cable

• Unblank Cable

• RF NB Negative 12 Volt

• RF MNS Negative 12 Volt

Requirements

No special requirements.

Test Sequence

1. Select the I/O Data test from the UPM Diagnostics screen.

2. Modify Test Parameters as necessary.

3. Click the Run button.

Expected Results

A blue color indicates a normal result. A red color indicates an error.