PM Schedule - BrightSpeed Elite, Edge, Excel

These schedules are for BrightSpeed only, as approved by CT Engineering. BrightSpeed PMs are based on gantries doing 2 million revolutions per year.

NOTE: last Revised: 28 Oct. 2015

NOTE: The PM is based on (3) service cycles per year at 670k revolution intervals.

• Schedule A - PM cycle begins when Rev Counter shows xxx670k revs.

• Schedule B - When Rev Counter increments another xxx670k revs.

• Schedule C - When Rev Counter increments another xxx670k revs.

NOTE: PM time without camera (includes time allocation for Gantry cover handling):

• Schedule A - 4.0 hours

• Schedule B - 3.0 hours

• Schedule C - 4.0 hours

NOTE: ** This step applies only to systems with filters on the DAS duct fan assembly.

Console

Gantry

High Voltage

PDU

System

Table