Home
Troubleshooting
Diagnostics
System Function
RF
Transmitter Diagnostics
Doing the DTX board level diagnostic
The DTX board level diagnostic tests the fiber link between the DTX and the Integrated Control Engine (ICE).

Troubleshooting
- Diagnostics
  - Doing the High Order Shim (HOS) supply diagnostics
    These diagnostics allow setting of currents on various High Order Shim (HOS) channels, and reading of these currents. In addition, various tests allow you to determine the functionality of the HOS circuit and the health of the supply.
  - System Function
    - Acquisition/Pulse Generation
    - Global Operator Console
    - Gradient
    - Patient Handling
    - Peripheral Communications
    - Power/Support Systems
    - Recon
    - RF
      - RF Hub Board Level and Datapath Diagnostics
      - Receiver Diagnostics
      - Transmitter Diagnostics
        Doing the DTX board level diagnostic
        The DTX board level diagnostic tests the fiber link between the DTX and the Integrated Control Engine (ICE).
        Doing a TPS reset
        This document provides instructions for doing a TPS reset and examples of the results output.
        RF Calibration Datapath Diagnostics (RRX)
      - UPM Diagnostics
      - Driver Module Diagnostics
  - Hardware Location
- System
- Gradient
- Radio Frequency (RF)
- Spectroscopy
- Doing system gain calibration (DV27 or later)
- System Gain Calibration (for systems DV26 or earlier)
  Body system gain calibration.
- Image Quality

Discovery MR750 3.0T System Service Methods
5690009-2EN Revision 4
Object ID: 00000018WIA30C99230GYZ
Topic ID: id_15667665 Version: 3.2
Date: Oct 11, 2021 10:12:12 PM

Doing the DTX board level diagnostic

Topic ID: id_SL11658720-1224923

Disclaimer

Depending on your service agreement, not all service tools, diagnostics, and utilities referenced in this document may be accessible. Contact your sales person for information on available service license packages.