• SIGNA MR355 / SIGNA MR360
  • Service Manual
  • 5856356-3EN Revision 5.0
  • Basic Service Documentation. Copyright General Electric Company.
  • Object ID: 00000018WIA30A7EF20GYZ
  • Topic ID: id_13106910 Version: 1.3
  • Date: Jul 5, 2019 11:49:11 PM

Table FRP covers

Prerequisites

Table 1. Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
10 minutes10 minutes0 minutes
Table 2. Tools and test equipment
ItemQuantityEffectivityPart numberManufacturer
Standard Tool (non-ferrous)1---
Table 3. Safety

Procedure

  1. Remove the Rubber cap and then screws of the FRP bottom cover on the near the Gantry end of the Table.
    Figure 1. FRP Cover1
  2. Similarly remove the cap and screws of the FRP bottom cover on the rear end of the Table.
    Figure 2. FRP Cover2
  3. Similarly remove the cap and screws of the FRP bottom cover on the rear end of the Table.
  4. Remove the right Bottom FRP Cover. Similarly remove the left Bottom FRP cover on the other side
    Figure 3. FRP Cover3
  5. Remove the right Bottom FRP Cover. Similarly remove the left Bottom FRP cover on the other side
  6. Now remove the Dock FRP Cover Locking screws and then the Dock FRP cover carefully.
    Figure 4. FRP Cover4
  7. Keep both Bottom FRP Covers and Dock FRP covers aside safely.

Finalization

No finalization steps.