• Discovery MR750 3.0T System Service Methods
  • 5690009-2EN Revision 4
  • Object ID: 00000018WIA30525880GYZ
  • Topic ID: id_2034912 Version: 1.9
  • Date: Feb 8, 2022 8:44:18 AM

Calibrating the Eizo EV2430 24-inch monitor

Procedure

  1. Refer to the figure and table below for locations and descriptions of the Eizo monitor controls.
    Figure 1. Front panel controls
    1EcoView sense sensorDetects movement of a person in front of the monitor
    2Ambient light sensorDetects ambient brightness
    3 buttonDisplays the power saving setting menu
    4SIGNAL buttonSwitches input signals for display
    5MODE buttonSwitches the color mode
    6ENTER buttonDisplays the Settings menu, selects an item on the menu, and saves.
    7▲ / [Volume icon], ▼/ [Brightness icon]
    • Controls navigation and adjusts settings
    • ▲ / [Volume icon] : Displays the volume adjustment menu
    • ▼ / [Brightness icon] : Displays the brightness adjustment menu
    8 buttonTurns power on or off
    9Power indicatorIndicates Monitors operation status
    • White: Operating
    • Orange: Power saving mode
    • Off
    Figure 2. Rear Panel Controls
    10Main power switchTurns the main power on ( | ) or off ( O ).
    11Power connectorConnects the power cord
    12Input signal connector

    Left: DisplayPort

    Center: DVI-D

    Right: D-Sub mini15-pin

    13Security lock slotComplies with Kensington’s MicroSaver security system
    14SpeakerOutputs audio
    15HandleHandle used for transportation
    16USB downstream portConnects a peripheral USB device.
    17USB upstream portConnects the USB cable for using the USB Hub function
    18Headphone jackConnects the headphones
    19Analog audio input connectorOutputs external audio from the monitor
    20StandAdjusts the height and angle (tilt and swivel) of the monitor
    21Cable holderManages cables
  2. Display the settings menu.
    1. Press Enter to display the setting menu.

    Note: Default display settings for Eizo EV2430
    ColorsRGB
    Color Temperature6500K
    Display Transfer functionGamma2.2
    BrightnessPreset at 80%
  3. Adjust settings
    1. Select a setting to adjust with ▲▼ and then press Enter. The setting submenu displays.

    2. On the submenu, select a setting to adjust with ▲▼ and then press Enter. The adjustment menu displays.

    3. Use ▲▼ to adjust settings as needed and then press Enter to set.
  4. Exit menu
    1. Select Return from the submenu and then press Enter.
    2. Select Exit and then press Enter.

Finalization

Perform a scan to make sure the system is functioning properly.