Object ID: 00000018WIA302DA010GYZ
Topic ID: id_2002881 Version: 9.0
Date: Feb 21, 2021 9:01:29 PM

Installing Service Packs

Prerequisites

Table 1. Personnel requirements
Required persons	Preliminary requirements	Procedure	Finalization
1	Not applicable	30 minutes	10 minutes

Table 2. Tools and test equipment
Item	Quantity	Part number	Manufacturer
Service Key	1

Table 3. Consumables
Item	Quantity	Part number	Manufacturer
GE Equipment Maintenance Sticker	1	5661793	N/A

Table 4. Required conditions
Condition
Updates are loaded after MR apps and service software have been loaded. Service Packs must be loaded at root level (applications not up).

Table 5. Safety
Before working in any GE Healthcare MR suite or performing any GE Healthcare service procedure, you must: Have read and understood all hazard conditions and safety requirements in the latest revision of the GE Healthcare MR Service Safety Manual (5452735). Have successfully completed all relevant GE Healthcare Environmental Health and Safety (EHS) courses (or for non-GE employees, equivalent workplace training courses). Comply with all site-specific training and workplace safety requirements. If you have any safety concerns at any time, do not begin work or immediately stop work and move to a safe location. Immediately contact your supervisor or site safety officer for instructions on how to proceed.

About this task

Important: Make sure that the latest Service Pack is loaded. See the latest revision of the MR Software Release Matrix, DOC1667089, available from the online documentation library.

Note: The Remote Software Download application can manage software updates and install them automatically. Refer to Installing updates from Remote Software Download (RSD) for more information.

Important: Open the “Read Me” file to identify any special procedures that need to be completed in order to install the service pack.