Jump to main content
  Optima MR450w GEM 1.5T System Service MethodsManual Type Goes HereOptional Hardware or Software Version Goes Here
Optima MR450w GEM 1.5T System Service MethodsManual Type Goes HereOptional Hardware or Software Version Goes Here
  • Readme
  • Safety
  • Pre-Installation
  • Installation and Upgrade
  • Adjustments/Calibrations
  • Functional Checks
  • Software
  • Theory
  • Planned Maintenance
  • Troubleshooting
  • Parts
  • Replacements
  • Applications
  • Coils
  • Options
  1. Home
  2. Adjustments/Calibrations
  3. Radio Frequency (RF)
  4. Probe
  5. Probe Data Sheets
  • Adjustments/Calibrations
    • System
    • Gradient
    • Radio Frequency (RF)
      • Body Coil Tuning
      • Calibrating transmit/receive dynamic disable

        Calibrates the open circuit fault detection levels of the dynamic disable drivers in the driver module. Perform this procedure after system installation, driver module replacement, body coil replacement, body hybrid replacement, or replacement of cabling between any of the previously listed devices.

      • Probe
        • Probe Tuning and SNR Check Tool (DV24 and later)
        • Calibrating PROBE Tuning and SNR Check
        • Manual Entry Probe/SV SNR Protocols
        • Probe Data Sheets
    • Magnet Enclosure
    • Patient Table
    • Global Operator Console (GOC)
    • Spectroscopy
  • Object ID: 00000018WIA30058030GYZ
  • Topic ID: id_12374318 Version: 1.2
  • Date: Jul 5, 2019 6:08:28 PM

Probe Data Sheets

Figure 1. Data Sheets
4901504.pdf

For details see Probe/SV Calibration and SNR Tests.

  1. Home
  2. Adjustments/Calibrations
  3. Radio Frequency (RF)
  4. Probe
  5. Probe Data Sheets
5690015-2EN | Revision 3 | en | Legal Notice | gehealthcare.com
©2021 General service documentation. Copyright General Electric company. All rights reserved.