• Optima MR450w BASE 1.5T System Service Methods
  • 5690012-2EN Revision 3
  • Object ID: 00000018WIA30ABF450GYZ
  • Topic ID: id_2024246 Version: 2.1
  • Date: Nov 3, 2020 5:55:58 PM

Running an antivirus scan

Procedure

  1. Click C Shell... on the Service Desktop manager.
    Note: The Shell window can only be launched when the EA3 user is included in the authorized EA3 group. Users not in this EA3 group will not have access to launch the Shell window. If you are not logged in as the proper logon user, log out and then log back on as the correct EA3 user with the authorized permissions.
  2. Log in as a root user.
    1. Type su - and press Enter.
    2. Type the root password and press Enter.
  3. In the root terminal type antivirus –o and press Enter.
    1. To run a quick scan, type 1 and press Enter.
      Note: This may take up to a maximum of 5 minutes.
    2. To run a full scan, type 2 and press Enter.
      Note: This may take up to a maximum of 5 hours.
  4. Wait for the Task was successfully started message.
  5. To check status of Scan, type antivirus –s and press Enter.
  6. To view the results of the full scan, execute the following command:
    gedit /opt/isec/ens/threatprevention/var/odsreport/full\ scan.log

    To view the results of the quick scan, execute the following command:

    gedit /opt/isec/ens/threatprevention/var/odsreport/quick\ scan.log
    The scan results will display as follows:
    Task Name            : XXXXXXX
Start time           : XXXXXXX
End time             : XXXXXXX
Total Requests       : XXXXXXX
No of files skipped  : XXXXXXX
No. of Good files    : XXXXXXX
No. of Cache hit     : XXXXXXX
No of Files Excluded : XXXXXXX
No. of Infections    : XXXXXXX
Timeout              : XXXXXXX
ScanError            : XXXXXXX
No of files cleaned  : XXXXXXX
No of files deleted  : XXXXXXX
Time taken           : XXXXXXX
Engine version       : XXXXXXX
DAT version          : XXXXXXX