5115335SCH - GOC5 Interconnect

note:

• There are two sheets for the GOC5 Interconnect that relate specifically to the VDARC Node Hardware. Sheet 1 applies the original “Westville” VDARC hardware. Sheet 2 applies to the newer “Jarrell” VDARC hardware.

  Please be certain to refer to the Interconnect that applies to your Operator Console variation.

• The VCT Image Generator (IG) Node hardware is not specifically identified as either Westville or Jarrell. However, whenever a Jarrell type VIG Node is used, it MUST be placed in the bottom standard slot 1 position. The Ethernet cable identifying the bottom IG #1 must be correctly connected between the VDARC Node and the VIG Node. If two Jarrell VIG Nodes are present, the second Jarrell VIG Node must be placed in slot 2 (middle).

note:

The Interconnect Diagrams for the GOC5 CT Operator Console are presented here in Scalable Vector Graphic (SVG) format. A suitable SVG Viewer is required to view these graphics. If your browser does not support SVGs -- or if you simply prefer PDF -- these diagrams may also be viewed as PDF, by selecting the appropriate PDF icon below.

For information on viewing SVGs (e.g., how to pan, zoom, etc.), please refer to the Scalable Vector Graphics (.svg) section of Help - Navigation Features and Tips.