• SIGNA™ Hero 3.0T Service Methods
  • 5852800-8EN Revision 1.0
  • Object ID: 00000018WIA30F16C40GYZ
  • Topic ID: id_2019389 Version: 2.1
  • Date: Apr 23, 2020 8:51:53 PM

Removing the tabletop front bumper

Removes the front bumper from the dockable tabletop.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-5 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-

Procedure

  1. Undock the table and move it away from the magnet to allow access to the front bumper.
  2. Remove the eight screws securing the front bumper to the tabletop.
    Figure 1. Tabletop front bumper
    1M4 x 25 Socket Head Screw
    2M4 x 12 Socket Head Screw
    3Front bumper
  3. Remove the front bumper from the tabletop.