• SIGNA™ Hero 3.0T Service Methods
  • 5852800-8EN Revision 1.0
  • Object ID: 00000018WIA30C6D010GYZ
  • Topic ID: id_2002976 Version: 10.2
  • Date: Jul 8, 2021 8:24:19 PM

Removing the rear bridge inner cover

Removes the rear bridge inner cover from the magnet enclosure.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-10 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-
Required conditions
Rear bridge cover is removed.

Procedure

  1. Remove the six screws securing the rear bridge inner cover to the magnet enclosure.
    Figure 1. Rear bridge inner cover screws
  2. Remove the rear bridge inner cover from the magnet enclosure.
    Figure 2. Rear bridge inner cover