• SIGNA™ Hero 3.0T Service Methods
  • 5852800-8EN Revision 1.0
  • Object ID: 00000018WIA30A6D010GYZ
  • Topic ID: id_2002974 Version: 9.2
  • Date: Aug 18, 2021 12:06:20 PM

Removing the rear bridge cover

Removes the table rear bridge cover from the magnet enclosure.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-5 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-

Procedure

  1. Remove the three screws securing the rear bridge cover to the rear bridge.
    Figure 1. Rear bridge cover screws
  2. Remove the rear bridge cover from the magnet enclosure.