• SIGNA™ Hero 3.0T Service Methods
  • 5852800-8EN Revision 1.0
  • Object ID: 00000018WIA30432C40GYZ
  • Topic ID: id_2018269 Version: 2.7
  • Date: Jul 7, 2021 3:51:56 PM

Installing the right-hand table side cover

Installs the right-hand cover onto the dockable table.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-5 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-
Required conditions
The left-hand table side cover is installed.

Procedure

  1. Rotate the right-hand arm board to the up position.
  2. Install the right-hand table side cover onto the table.
    Figure 1. Right-hand side table cover
  3. Install the eight M6 x 20 Button Head Collar Screws securing the side cover to the table.
    Figure 2. Side cover bore-end bottom screws
    Figure 3. Side cover handle-end bottom screws
  4. Install the three M6 x 10 Button Head Collar Screws securing the side cover to the table.
    Figure 4. Right-hand side cover side screws
  5. Install the IV pole into the acrylic tube.
    Figure 5. IV pole