• SIGNA™ Hero 3.0T Service Methods
  • 5852800-8EN Revision 1.0
  • Object ID: 00000018WIA30F6D010GYZ
  • Topic ID: id_2002979 Version: 6.4
  • Date: Jul 7, 2021 3:59:54 PM

Installing the magnet rear cable cover

Install the rear cable cover onto the magnet enclosure.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-5 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-
Required conditions
Magnet right hand top cover is installed.
Magnet left hand upper rear cover is installed.
Rear endbell is installed.

Procedure

  1. Place the rear cable cover above the cable cover bracket.
    Figure 1. Rear cable cover
  2. Slide the cover down to engage the cover clips onto the cover bracket.
  3. Install the rear cable cover onto the magnet enclosure.
  4. Install four M10 x 25 Socket Head Cap Screws securing the rear cable cover to the magnet enclosure.
    Figure 2. Rear cable cover screws