• SIGNA™ Hero 3.0T Service Methods
  • 5852800-8EN Revision 1.0
  • Object ID: 00000018WIA30D6D010GYZ
  • Topic ID: id_2002977 Version: 10.2
  • Date: Jul 7, 2021 6:17:34 PM

Installing the rear bridge inner cover

Installs the rear bridge inner cover onto the magnet enclosure.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-10 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-

Procedure

  1. Install the rear bridge inner cover onto the magnet enclosure.
    Figure 1. Rear bridge inner cover
  2. Install six M10 x 25 Socket Head Cap Screws securing the rear bridge inner cover to the magnet enclosure.
    Figure 2. Rear bridge inner cover screws