• SIGNA™ Hero 3.0T Service Methods
  • 5852800-8EN Revision 1.0
  • Object ID: 00000018WIA30B6D010GYZ
  • Topic ID: id_2002975 Version: 9.3
  • Date: Aug 18, 2021 12:06:28 PM

Installing the rear bridge cover

Installs the table rear bridge cover onto the magnet enclosure.

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-5 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Nonmagnetic Titanium Service Tool Kit, Small Set15113258-
Required conditions
Rear bridge inner cover is installed.

Procedure

  1. Install the rear bridge cover onto the rear bridge inner cover.
    Figure 1. Rear bridge cover
  2. Install three M10 x 20 Button Head Screws securing rear bridge cover to rear bridge inner cover.
    Figure 2. Rear bridge cover screws