Installs the hardtop cover onto the dockable table cradle.
Prerequisites
| Personnel requirements |
|---|
| Required persons | Preliminary requirements | Procedure | Finalization |
|---|
| 1 | - | 10 minutes | - |
| Tools and test equipment |
|---|
| Item | Quantity | Part number | Manufacturer |
|---|
| Nonmagnetic Titanium Service Tool Kit, Small Set | 1 | 5113258 | - |
| Required conditions |
|---|
| The bore-end cradle cover is installed. |
Procedure
- Install the hardtop cover onto the cradle and slide it under the bore-end cradle cover.
Figure 1. Cradle hardtop cover
- Slide the strap rails towards the bore end of the cradle to install them.
Note: Lift the cradle flap prior to sliding the strap rails.
Figure 2. Cradle strap rails
- Install the handle-end cover brackets onto the cradle.
Note: Orient as shown.
Figure 3. Handle-end cover brackets
| 1 | Screw |
| 2 | Handle-end cover bracket |
- Install three screws securing each bracket to the cradle.
