• Discovery MR750w and SIGNA™ Architect T 3.0T System Service Methods
  • 5690002-2EN Revision 4
  • Object ID: 00000018WIA300FD010GYZ
  • Topic ID: id_2003032 Version: 3.0
  • Date: Aug 5, 2019 1:52:16 PM

Powering down the ICN from root level

If the application's software is down, you can power down the ICNs by using command line at the root level.

Procedure

  1. Log into the application using the root login.
  2. In the xterm window, type: /etc/init.d/poweron_vres stop and press Enter.
    The ICN(s) should turn off after one minute.

    Result

    The Dell ICN is powered down if the green power LED located on the upper left side of the front of the ICN is not illuminated.