• Discovery MR750w and SIGNA™ Architect T 3.0T System Service Methods
  • 5690002-2EN Revision 4
  • Object ID: 00000018WHA302172GYZ
  • Topic ID: id_2001520 Version: 4.0
  • Date: Jul 17, 2019 6:08:58 PM

Installing Linux host OS software

Prerequisites

Personnel requirements
Required personsPreliminary requirementsProcedureFinalization
1-40 minutes-
Tools and test equipment
ItemQuantityPart numberManufacturer
Linux OS software DVD1--

Procedure

  1. Insert the Linux OS software DVD into the appropriate DVD drive.
  2. Restart the host computer.
  3. From the HELiOS based GEHCMR Operating System (MR OS) Install screen, select 1. GEHCMR - MR Auto Install and press Enter.
    The Welcome to HELiOS for x86_64 screen displays.
    Note: During the beginning of this process (such as checking dependencies and formatting disk drive), there are two active buttons in the lower right: ←Back and →Next. Do not select these buttons. Later in the process, these buttons are greyed out (inactive).
    The software load proceeds through some checks and then begins the OS load. No responses are required.
    A progress bar shows the percentage complete. This process takes about 15 or 20 minutes.

    Result

    When the software load is complete, a message appears stating that installation has completed successfully.
  4. Eject the DVD after the software is successfully installed.
  5. Select Reboot.

Finalization

Install the remaining software.