Table FRP covers

Prerequisites

Procedure

  1. Remove the Rubber cap and then screws of the FRP bottom cover on the near the Gantry end of the Table.

    Figure 1. FRP Cover1

  2. Similarly remove the cap and screws of the FRP bottom cover on the rear end of the Table.

    Figure 2. FRP Cover2

  3. Similarly remove the cap and screws of the FRP bottom cover on the rear end of the Table.
  4. Remove the right Bottom FRP Cover. Similarly remove the left Bottom FRP cover on the other side

    Figure 3. FRP Cover3

  5. Remove the right Bottom FRP Cover. Similarly remove the left Bottom FRP cover on the other side
  6. Now remove the Dock FRP Cover Locking screws and then the Dock FRP cover carefully.

    Figure 4. FRP Cover4

  7. Keep both Bottom FRP Covers and Dock FRP covers aside safely.

Finalization

No finalization steps.