PS for Exciter

Prerequisites

Figure 1. Location of Power Supply

Procedure

  1. Disconnect the connectors which are routed from PS for Exciter. If necessary, cut the tie wraps.
  2. Loosen 2 screws tightening power supply and chassis.
    • notice
    • PS Tray is tightly inserted in the bracket. Need enough pull force to remove it.
  3. Remove the Exciter power supply from System Cabinet.

    Figure 2. PS for Exciter

  4. Restore new Exciter power supply by the reverse order of removal.
  5. Restore the system cabinet by the reverse order of the removal.