Laser Light Alignment

Prerequisites

Table 2. Safety

laser radiation
Viewing the laser output with certain optical instruments (for example, eye loupes, magnifiers and microscopes) may pose an eye hazard
Do Not stare into the beam or view directly with optical instruments

Turn the laser lights on.
Run a plumb line, using a non-magnetic device and string down from the Sagittal and Axial (Top) laser light. Verify that both the Sagittal and Axial Alignment Lights are aiming straight down. See Figure 1. If adjustments are needed, remove the upper display by carefully prying the cover off. See Figure 2. The Adjust Rods for both the Sagittal and Axial can be accessed.

Figure 1. AXIAL AND SAGITTAL BEAM CHECK

Figure 2. AXIAL & SAGITTAL LIGHT ADJUSTMENT

Perform DQA Test, refer to DQA Tool II