Determining GE Coil Type

Prerequisites

This procedure is intended to determine the GE coil name used during a scan if the Customer has re-named a coil.

Procedure

  1. Make sure Exam is loaded on the hard drive. If needed, dump the Exam back on to the system hard drive.
  2. Open a Cshell
  3. In the Cshell type: readHeadEnter. A tool will appear.
  4. Enter the proper Exam number and series number.
  5. Select option gEnter
  6. Select option yEnter
  7. Go to the second page and scroll until the coil name is displayed. See Figure 1.

    Figure 1. Coil Details

Finalization

No finalization steps.