Topic ID: reference_nsv_4fw_1jb
Version: 2.0
Date: Oct 28, 2019 4:24:57 AM

Rotor Diagnostic Test

Table 2. Required conditions
Condition	Reference	Effectivity
PPC kV control board alive and running: S17-S24 Leds are lit successively or a combination of them blink.	-	-
rotation board alive and running: DS5 Led blinking.	-	-
rotation DC supply present: DS7 neon is lit.	-	-
cabling among rotation board, HEMIT and tube checked.	-	-

Overview

Objective: The purpose of this test is to drive the rotation inverter in high speed mode and low speed mode on the tube in order to identify a defective rotation board or defective phase capacitors or a wrong connection among rotation board, HEMIT and tube. Summary: Run diagnostic. The test is executed without high voltage and filament heating, and needs no manual operation.

Launch the GENERATOR TOOL.
Launch the Rotor Diagnostic tool.
Run the test. A rotor sequence will proceed.
If a problem occurs, check the error code.

1 Finalization

No finalization steps.