• Topic ID: id_17423009
  • Version: 4.0
  • Date: Jan 20, 2020 8:32:09 PM

Table Load Height Setting

Prerequisites

Overview

The table height moved by Load table foot pedal can be changed to the following three values, 210mm (default), 190mm or 170mm. This procedure describes how to change this table height.

Procedure

  1. Open a Unix Shell and type the below command and press Enter.

    {ctuser@hostname} /usr/g/GEfirm/setLoadHeight

  2. The following message will pop up:


    *** Load Hight Tool for HP/VCT ***
    Current setting is 210
    [1] : 170 mm
    [2] : 190 mm
    [3] : 210 mm
    [0] : quit.
    Enter # to Change or quit?
    =
                  

    Enter # to Change or quit?

  3. Input the selected number according to customer’s request, then press [Enter]. Below is an example of setting 190 mm:

    Enter # to Change or quit?


    =2
                  


    Succeeded : <190>-> /usr/g/fw/configure/uif_characterization.cfg
                  

  4. Perform the Scan Hardware Reset from the Common Service Desktop Home menu.

Finalization

  1. Move the table up by Load foot pedal and confirm it stops at desired height automatically.