Rotor Diagnostic Test (Pro, RT, VCT)

The purpose of this test is to drive the rotation inverter in high speed mode (for application supporting high speed mode) and low speed mode on the tube in order to identify a defective rotation board or defective phase capacitors or a wrong connection between rotation board and tube. Summary: Run diagnostic.

1. If desired, you may check any or all of the following:
   1. PPC kV control board alive and running: S0-S7 Leds are lit successively or a combination of them blink
   2. cabling between rotation board and tube checked
   3. rotation board alive and running: DS5 Led blinking
   4. rotation board DC supply present: DS7 neon is lit
2. Launch the GENERATOR TOOL. See tools section for more information.
3. Launch the Rotor Diagnostic tool.
4. Run the test. A rotor sequence will proceed.
5. If a problem occurs, check the error code.